Nissin Di700 Manuale Utente Scaricare il pdf (Pagina 11)

TTL flash power compensation is provided in 9 steps by half Ev

increments for -2.0, -1.5, -1.0, -0.5, 0, +0.5, +1.0, +1.5 and +2.0 Ev.

To set the Flash power compensation

level rotate the dial to the power level

you desire.

When Di700 shows no level indication LED turned on, the flash

power compensation level is at even (0 Ev) level as default value.

Take a picture and the subject is shown with required lighting

effect by keeping the background exposure level as originally

expected.

On some cameras, the TTL flash power compensation setting is

provided in its menu mode. When setting the TTL flash power

compensation on your camera, any compensation which is also

set on the Di700 will be counted in addition to the compensation

you selected in the camera’s menu mode. ( i.e. Having a +1 com-

pensation set on the flash and a +1.3 compensation set in the

camera would yield a total compensation of +2.3 EV.)

With the latest TTL flash control system, the flash power level is

always automatically controlled by the camera for the most

appropriate exposure. If you wish, if you can soften or weaken the

flash light, or give more light to the subject without changing the

environmental or background exposure effect. The Di700 can make

it possible to quickly adjust the exposure for each particular flash

picture as needed.

TTL flash power compensation

Joy of Flash Photography

-2.0

-1.5

-1.0

-0.5

+0.5

+1.0

+2.0

+1.5

1/128 1/64 1/32 1/16 1/8 1/4 1/2 1/1

Rotate the dial to “TTL” mode then

press the Set button.

Set Di700 to the camera’s hotshoe and

press the on/off switch to power on.

Press the on/ off switch once again to lock this condition on your

flash. (Press it again to release the lock)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Nessun commento

Nissin Di700 Manuale Utente Pagina 11